Montage Spuhr 35MM  36MM
Montage Spuhr 35MM  36MM

MONTAGE SPUHR SP-5002 35MM

014692

35 MM
Article no.: SP-5001
0 MIL/0 MOA
Hauteur: 30 mm/1.18”
Espace: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)
Hauteur: 126 mm/4.96”
Poids: 239 g/8.4 oz
Note: ne convient pas à l'IOR 3-25x50 Lütaz/Raider

Article no.: SP-5002
0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96”
Weight: 272 g/9.6 oz

Article no.: SP-5601
6 MIL/20,6 MOA
Hauteur: 30 mm/1.18”
Espace: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)
Longueur: 126 mm/4.96”
Poids: 238 g/8.4 oz
Note: ne convient pas à l'IOR 3-25x50 Lütaz/Raider

36 MM
Article no.: SP-6016
Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.
0 MIL/0 MOA
Hauteur: 38 mm/1.5”
Longueur: 154 mm/6.06"
Poids: 264 g/9.3 oz
Note: n'a pas de niveau à bulle

Article no.: SP-6026
"The Noveske Shooting Team mount"
The Noveske Shooting Team Mount was developed on special request from the Noveske Shooting Team to give them extra advantage in 3gun competitions.
Most AR15-style cantilever mounts are 1,5" (38mm) high, which provides a nice good cheek weld. The SP-6026 is 1,26" (32mm high) and gives a much tighter cheek weld than most other AR-mounts on the market, making fast and instinctive shooting much easier and faster.
As the SP-6026 is designed for speed shooting in 3gun and IPSC-style rifle competitions and therefore does not have the bubble level most other Spuhr mounts have. Allows the scope to be mounted 70 mm/2.76” farther forward than with a non-cantilever mount.
0 MIL/0 MOA
Hauteur: 32 mm/1.26”
Longueur: 140 mm/5.51”
Poids: 223 g/7.9 oz

390,00 €

Détails du produit

Spuhr